Page 29 - corgidirectnew2015catalogue

PLUMBING EQUIPMENT

CombiHeat Power Flushing Heater Total Dissolved
Solids Meter
The CombiHeat is an optional heating element for use with the
CombiMag Power Flushing Filter (MI039).When undertaking The TDS Pal meter is used to
the chemical flushing stage of a power flush it can be measure the conductivity of
beneficial for the water to be warm, ideally around 50°C to water and hence the level of
enhance the performance of flushing chemicals, therefore total dissolved solids in solution.
reducing the time taken for a power flush. ✓ Microprocessor-based
✓ Direct full-scale readout
✓ Increases power flushing efficiency ✓ Cost effective
eliminates guesswork
✓ Helps clear severely choked radiators ✓ Simple to use ✓ Automatic Temperature

CODE: MI060 £145.00 Compensation (ATC)
✓ Dip-type sensor allows direct
PROMOTIONAL PRICE EasyFit
Isolator Tool immersion into sample
Kit ✓ Stainless steel electrodes

The installation kit for the for good chemical
Aladdin EasyFit Isolator, compatibility and durability
including; a hex-bit
driver, a socket driver, CODE: KTK016
and Phillips-head driver, £65.00
all re-usable for further
installations. Polar Refill

CODE: EIT £6.00 700g canister of
high performance
freezing spray.

CODE: PCAN
£25.00

Jet Swet Water Flow
Prevention Tools

A unique tool that will save you time and assist
you with many common work problems including,
temporarily sealing outlets from cold water storage
cisterns, sealing feed/expansion cistern feed pipes
to aid in flushing central heating systems, sealing
supply pipework (up to 75 PSI) and enable gate
and full bore isolation valve replacement.

CODE: NTJS28 (28mm)
£30.00
CODE: NTJS1500 (15 & 22mm)
£50.00

Call us now: 0800 915 0490 or visit our website: www.corgi-direct.com 29