Page 28 - corgidirectnew2015catalogue

PLUMBING EQUIPMENT

Hand Operated Injector Spray Kamco Electric
Syphon Filter
Enables corrosion
inhibitors, flushing This handy tool will save you time and
chemicals and boiler mess when you’re power flushing a
noise suppressants to vented system and need to empty a water
be injected directly into tank. There are also loads of other uses,
the main flow of including; emptying the water out of a toilet
heating systems. bend, emptying out the last dregs of water from
Key Benefits: your power flusher tank and decanting flushing
✓ Removes the need chemicals or corrosion inhibitor from larger
packs into small ones.
to re-pressurise a
system after injection CODE: MI062 £17.50
of chemicals
Systemsure Water Analysis Kit
✓ Supplied complete with two special nickel
plated steel air bleed valve adapters for the most The Systemsure
common radiator bleed valve sizes water analysis test
kit assists you in
✓ Four litre capacity tank, enabling it to be used making an immediate
to add chemicals to even the largest domestic determination of the
systems with one operation quality of water in
a heating system.
CODE: IK6 £74.95 Glassware and
reagents to test water
Anton Flowmate II / ADST BEST for pH value, dissolved
iron, dissolved
SELLER copper, chloride, total
hardness and inhibitor
FREETHERMOMETER concentration, together
with an illustrated
Easily and quickly set operating flow rates instruction manual.
to manufacturers’ specification.
✓ Measures in litres or gallons per minute CODE: KTK032 £110.00
✓ Sturdy plastic design and long-life stainless steel
Leak Mate Tool
mesh strainer avoids turbulence
✓ Easy-to-check if combi boilers or water heater A unique tool that stops leaks in seconds allowing you
to safely drain a system. It is supplied with 10, 15 &
needs descaling 22mm seals that have a recessed step moulded in to
✓ Weir Gauge fit copper fittings. This tool can also be used to seal
✓ FREE Water Resistant Digital Thermometer Included split and holed plastic or copper pipes up to 10 Bar.

(-50°C to 150°C) CODE: LM1 £12.49

CODE: FWG £39.00 Brilliant insurance policy as it vastly
minimised the escape of water from the
pipe. Easily worth the money and will sit
comfortably in my tool box
for years.”
Dan

28 Extensive technical knowledge in gas & heating